Q93

1MP People Counting Indoor Mini Dome with D/N, Adaptive IR, Extreme WDR, SLLS, Fixed Lens

Q93
  • People Counting
  • 1 Megapixel
  • Day & Night with Superior Low Light Sensitivity and Adaptive IR LED
  • Fixed Lens with f2.55mm/F2.2
  • Extreme WDR
  • Super wide angle
  • Event trigger, response and notification

Specification

Device

Product TypeMini Dome
Maximum Resolution1MP
Product ApplicationPeople Counting
Application EnvironmentIndoor
Image SensorProgressive Scan CMOS
Sensor Size1/2.8 “
Effective Pixels2065(H) X 1553(V) (3.21 MP)
Day / NightYes
Low Light SensitivitySuperior
Minimum IlluminationColor: 0.1 lux at F2.2 (30 IRE, 2400 K); B/W: 0 lux at F2.2 (IR LED on)
Color to B/W SwitchISP based switch, configurable
Mechanical IR Cut FilterYes
IR Sensitivity Range700-1100nm
IR LEDAdaptive IR LED x 3 (850 nm)
IR Working Distance5m
Electronic Shutter1/5-1/64000 second (manual mode); 1/5-1/64000 second (auto mode)
Horizontal Resolution (TV Lines)1450 TVL
S/N Ratio56 dB

Lens

Focal LengthFixed focal, f2.55mm
ApertureF2.2
IrisFixed iris
FocusFixed focus
Lens MountBoard mount
Horizontal Viewing Angle108.6°
Vertical Viewing Angle82.1°

Video

CompressionH.264 (Baseline/ Main/ High profile), MJPEG
Maximum Frame Rate vs. Resolution30 fps at 1280 x 720
30 fps at 640 x 480
30 fps at 320 x 240
Multi-StreamingSimultaneous triple streams based on three configurations
Bit Rate128Kbps – 12Mbps (per stream)
Bit Rate ModeConstant, Variable
Wide Dynamic RangeExtreme WDR (145 dB)
Image EnhancementWhite Balance, Brightness, Contrast, Sharpness, Automatic gain control, Flickerless, Defogging
Digital Noise Reduction2D + 3D DNR
Text OverlayYes
Counting Technology2D
Built-in AnalyticsBasic People Line Counting, Basic People Area Counting, Basic People Queue Detection
Server-based AnalyticsObject Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, People Queue Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy)
Image OrientationFlip, Mirror
IVS performanceCertain algorithms may require more computing power, which may limit the number of algorithms that can be concurrently used in the camera. Please test the actual performance before using in a project.

Network

Network Protocol & ServiceIPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X, To be available through future firmware upgrade
Ethernet Port1 x RJ-45 pigtail connector
SecurityIP address filtering, HTTPS encryption, Password protected user level, Anonymous login, IEEE 802.1X network access control

Video Analytics

Analysis Source TypeVideo
Metadata AccuracyStandard

Event

Event TriggerScheduler, System is going to reboot, System booted successfully, Failed to write storage
Event ResponseNotify control center, Change camera settings, Command other devices, E-mail notification with snapshots, Push notification to mobile device, Save video to local storage, Upload video to NVR server, Upload video or snapshot to FTP server, Activate external device through digital output

Integration

Unified SolutionFully compatible with ACTi software
Software Development KitYes
GPS PositionManual setting
ONVIF CompliantYes, Profile S, Profile G, Profile T* (To be available through future firmware upgrade), Profile Q
Web BrowserIE 11
Auto Firmware UpgradeYes* (To be available through future firmware upgrade)

Interface

Local StorageMicroSDHC, MicroSDXC Memory Card Slot (card not included, up to 256GB)

Installation

Distance to Target (People)2.4m – 4.1m (7.9ft – 13.5ft)
Lens Direction & Counting Method (People)Face Down: Line Counting, Inside Area Counting

General

Power SourceDC 12V, PoE Class 3 (IEEE802.3af)
Power Consumption5.6 W (PoE), 3.84 W (DC)
Weight232g (0.511lb)
Dimensions(Ø x H): 115mm x 30.02mm (4.5″ x 1.2″)
Mount TypeSurface, Gang Box, Pendant, Converter for NPT Standard Mounts
Starting Temperature-10°C ~ 50°C (14°F ~ 122°F)
Operating Temperature-20°C ~ 50°C (-4°F ~ 122°F)
ApprovalsCE, FCC, UL (for optional PoE injector and power adapter)
Warranty3 Year(s). For extended warranty offering